Our Products

Maxtreat-9001

Maxtreat – 9001 is a broad spectrum antiscalant which is recommended for controlling inorganic scales found in surface, ground & sea water.

MAXTREAT-9001 N

Maxtreat 9001N is highly effective liquid antiscalant to control inorganic fouling along with the particulate matter fouling with specific dispersant which helps to keep the Reverse Osmosis membrane surface clean.

Maxtreat-9002

Maxtreat 9002 is a highly effective liquid antiscalant, specially formulated for feed water with higher levels of silica and metal oxides. Use of Maxtreat 9002 controls silica scales and fouling due to metal oxide threby giving sustained performance for a longer time & reducing unscheduled shutdowns and cleaning costs.

Maxtreat-9004

Maxtreat 9004 is a liquid antiscalant / antifoulant for reverse osmosis systems for all types of membranes treating feed waters that have high potential for fouling. Continuous use of Maxtreat 9004 reduces membrane fouling tendencies thereby giving sustained performance for a longer time and reducing unscheduled shutdowns and cleaning costs.

Maxtreat-9201

Maxtreat 9201 is specially formulated blend of cleaners for effective removal of carbonate, metal oxide and sulfate scales of Barium, Strontium and Calcium in reverse osmosis systems.

Maxtreat-9202

Maxtreat 9202 is a low pH liquid formulation to remove calcium carbonate, metal hydroxides & sulfate scales of Calcium, Barium and Strontium.

Maxtreat-9203

Maxtreat – 9203 is cleaner which is recommended for controlling inorganic scales found in surface, ground & sea water.

Maxtreat-9204

Maxtreat – 9204 is a blend of organic acids & surface active agents which is recommended for cleaning inorganic scales found in surface, ground & sea water.

Maxtreat-9651 M

Maxtreat 9651 is a safe, effective non oxidizing microbiocide in liquid form, highly effective against a broad spectrum of microorganisms & requires low dosage level.

MAXTREAT-BWC

pH Booster in liquid form specially developed for the spray pond application in sugar industry.

MAXGREEN-3220 S

Maxgreen 3220 S is a blend of an antiscalant and an oxygen scavenger in powder form, designed for the treatment of boiler feed water used in coil type boilers. It contains an antiscalant to reduce deposition of calcium and iron compounds in coils and an oxygen scavenger to prevent corrosion.

MAXGREEN-3221

Maxgreen™ 3221 is environmental friendly liquid formulation designed for the internal treatment of feed water used in smoke tube boilers. It contains corrosion inhibitor, antiscalant and sludge conditioner. Maxgreen™ 3221 is formulated for the treatment of smoke tube boilers using soft or demineralized feed water.

Maxgreen-3100 L

Maxgreen 3100 L is a catalyzed liquid oxygen scavenger. It is recommended for the rapid and complete removal of dissolved oxygen from boiler feed water where feed water alkalinity is excess.

MAXGREEN-3222 N

“MAXGREEN 3222N is environmental friendly liquid formulation designed for the internal treatment of feed water used in water tube boilers. It contains corrosion inhibitor, antiscalant and sludge conditioner. MAXGREEN 3222N is formulated for the treatment of water tube boilers using soft or demineralized feed water.
NSF INTERNATIONAL has listed MAXGREEN 3222N for treating boilers or steam lines, where steam produced may contact edible products and/or
cooling systems where the treated water may not contact edible products in and around food processing areas (G6).
BENEFITS
ENVIRONMENTAL FRIENDLY
Being eco-friendly, MAXGREEN 3222N does not persist in the environment as it breaks down into innocuous degradation products.
PREVENTS AND REMOVES DEPOSITION
MAXGREEN 3222N contains a polymeric sludge conditioner which fluidizes sludge. A powerful antiscalant prevents calcium and iron deposition
and also helps in the removal of existing scale. The combination of a sludge conditioner and antiscalant keeps the boiler clean.
CORROSION INHIBITION
MAXGREEN 3222N contains a corrosion inhibitor which forms a protective passive film over the boiler surface. The corrosion inhibitor reduces fouling due to iron hydroxides, pitting and tube failures.
SAVES ENERGY
The boiler is kept clean due to the antiscalant and dispersant actions of MAXGREEN 3222N. This helps to maintain peak heat transfer efficiency”

MAXGREEN-3100 N

“MAXGREEN™ 3100N is a powdered form of catalyzed oxygen scavenger used for low and medium pressure water tube and smoke tube boilers. It is used for the rapid and complete removal of dissolved oxygen from boiler feed water.
NSF INTERNATIONAL has listed MAXGREEN 3100N for treating boilers or steam lines, where steam produced may contact edible products and/or
cooling systems where the treated water may not contact edible products in and around food processing areas (G6).
BENEFITS
ENVIRONMENTAL FRIENDLY
Being eco-friendly, MAXGREEN™ 3100N does not persist in the environment, and it breaks down into innocuous degradation products.
RAPID REACTION
The catalyst helps to speed up the removal of dissolved oxygen. Normal reaction time of MAXGREEN™ 3100N is very low compare to uncatalysed
oxygen scavenger.
pH CONTROL
MAXGREEN 3100N is formulated as alkaline product to get proper pH
control for optimum availability of catalyst for rapid oxygen removal.”

Maxtreat-3004

MAXTREAT-3004 is an alkaline formulation used to increase the alkalinity of boiler feed water. It is used to reduce corrosion of feed water tank, lines and pump.

COOLING WATER CHEMICALS

Maxtreat-2521

MAXTREAT- 2521 is anon heavy metal liquid formulation of corrosion and scale inhibitors designated to protect ferrous equipment in recirculating cooling water systems. Corrosion inhibition provided by MAXTREAT 2521 is superior to other non chromate treatments. The product contains a threshold inhibitor developed for controlling precipitation of calcium phosphate, carbonate, sulfate. MAXTREAT 2521 also contains a dispersant for suspended matter such as silt, metal oxide etc.. The dispersant keeps suspended matter in dispersed condition avoiding deposition in heat exchangers.

Maxtreat-2521C

MAXTREAT- 2521C liquid formulation of scale inhibitors and antifoulants alongwith inhibitors for noble metallurgy designated to protect recirculating cooling water systems from scale, fouling, iron fouling and corrosion.

Maxtreat-2710

MAXTREAT- 2710 is a component of an advanced treatment of cooling water chemicals supplier in Mumbai technology that provides a cost effective alternative to traditional chromate treatment programs for industrial circulating water systems.

Maxtreat-2715

MAXTREAT- 2715 is a component of an advanced treatment technology that provides a cost effective alternative to traditional chromate treatment programs for industrial circulating water systems.

Maxtreat-2901

“MAXTREAT-2901 is a nitrite based liquid formulation, along with a pH buffer and yellow metal corrosion inhibitor. The product is recommended for use in closed component cooling system like D G sets and chillers. Also recommended for use as corrosion inhibitor in brine cooling and very low temp. cooling systems
BENEFITS :
• Effective over wide range of conditions, such as in systems of multi-metal construction, where the flow is sluggish and oxygen levels are either extremely low or high.
• Contains no chromate and produces no color in the treated water. Does not stain or harm equipmentt like mechanical seals etc.
• Buffering agent automatically adjusts pH at the preferred level.
• Protects piping, valves, pumps and heat exchangers by producing a protective film on all exposed metal surfaces – iron, steel, copper, copper alloys and aluminum.
• Easy to feed liquid, requires no premixing.
• Controls corrosion of both ferrous and non ferrous metallurgy.”

Maxtreat-2902

“MAXTREAT-2902 is a liquid blend of molybdate and nitrite, along with a pH buffer and copper corrosion inhibitor.The product is recommended for use in closed component cooling system like chiller, DG sets, steel industry closed
loops like mold and machine cooling, lance, hood stack cooling etc.
BENIFITS
Effective over wide range of conditions, such as in systems of multi-metal construction, where the flow is
sluggish and oxygen levels are either extremely low or high.
• Contains molybdate & nitrites as a synergetic blend.
• Contains no chromate and produces no colour in the treated water.
• Buffering agent automatically adjusts pH at the preferred level.
• Protects piping, valves, pumps and heat exchangers by producing a protective film on all exposed metal
surfaces – iron, steel, copper, copper alloys
• Easy to feed liquid, requires no premixing.
• Controls pitting corrosion. Buffers and dispersants maintain pH and keep the surface clean.”

Maxtreat-2925

“MAXTREAT-2925 is a nitrite based liquid formulation, along with a pH buffer and yellow metal corrosion inhibitor.The product is recommended for use in closed component cooling system like D G sets and chillers. Also recommended for use as corrosion inhibitor in brine cooling and very low temp. cooling systems.
BENIFITS
• Effective over wide range of conditions, such as in systems of multi-metal construction, where the flow is sluggish and oxygen levels are either extremely low or high.
• Protects DG, Chillers, brine and ultra low temp circuits from corrosion. Does not stain or harm equipment like mechanical seals etc.
• Protects machine & mold cooling circuits and various closed loops associated with steel mills.
• Protects piping, valves, pumps and heat exchangers by producing a protective film on all exposed metal surfaces – iron, steel, copper, copper alloys and aluminum.
• Easy to feed liquid, requires no premixing.
• Controls corrosion of both ferrous and non ferrous metallurgy.”

Maxtreat-7202 D

MAXTREAT 7202 D is a special co-polymer liquid product formulated to control the deposition of PO4, SO4 SiO2,
Calcium scales in once-through and recirculating water systems.

Maxtreat-7700

MAXTREAT-7700 corrosion inhibitor rapidly forms a stable, evenly distributed protective film on iron and steel piping and heat exchangers.

MAXGREEN -7205

MAXGREEN 7205 is an Organo Inorgano formulation that acts as an excellent scale and corrosion inhibitor in all types of water. It rapidly forms a stable, evenly distributed protective film on all ferrous metallurgy thereby reducing corrosion, minimizes pressure drop by preventing rust build-up and increases the life of equipment.

Maxquat-50

MAXQUAT-50 is a powerful , broad spectrum microbiocide in industrial recirculating water ,air supplier of cooling water chemicals in Mumbai washer systems and for various other applications.

Maxtreat-606

MAXTREAT 606 is used to control build-up of biological slimes formed by algae and bacteria in Cooling Water Systems. The product is also effective in controlling sulphate reducing bacteria. High surface activity aids in cleaning systems by loosening and dispersing existing slime dposits from surfaces of Cooling Systems Equipments.

Maxtreat-608

MAXTREAT 608 is used to control build-up of biological slimes formed by algae and bacteria in Cooling Water Systems. The product is also effective in controlling sulphate reducing bacteria. High surface activity aids in cleaning systems by loosening and dispersing existing slime dposits from surfaces of Cooling Systems Equipments.

Maxtreat-2002

“MAXTREAT – 2002 cooling water treatment is an effective BIO & ORGANIC-dispersant designed to remove and disperse deposits cause by biological activity or process contamination. MAXTREAT – 2002 is very effective in softening and dispersing the EPS (Extracellular Polymeric Substances) that keep the foulant together. It has also been found to be very effective at removing deposits containing process contaminants such as hydrocarbons.
BENEFITS :
• Disperses adherent biomass and slime allowing for better contact of biocides / chlorine leading to better efficacy.
• Compatible with cationics, anionics and non-ionic compounds.
• Disperses oil, hydrocarbons and other organic foulants, keeping the system clean and free from organic deposits.
• Superior wetting ability aids in removal of “turbidity”, ash, coal and similar inorganic fouling.
• Not affected by higher levels of hardness, TDS and heavy metals.
• Compatible with cooling water programs, chlorination and chlorine activators.
• Stable under both, alkaline and acidic conditions of operations.
• Can be used as a continuous feed or as slug dose.”

Maxtreat 7002

Maxtreat-651

MAXTREAT- 651 is a isothiazoline based non oxidizing biocide in liquid form, highly effective against a broad spectrum of microorganisms.

MAXTREAT-617

MAXTREAT-617 Microbiocide is a chlorine donating compound in powder form. When introduced into the water stream, Maxtreat 617 releases powerful oxidizing hypohalous acid providing superior effectiveness against broad spectrum of microorganisms.

MAXQUAT-50

MAXGREEN-6800

MAXGREEN 6800 is a powerful broad spectrum microbiocide.It is halogen-free, does not contribute to the formation of dioxin or absorbable organic halides (AOX).Is effective in controlling slime-forming bacteria, sulfate-reducing bacteria and algae in water cooling towers, industrial recirculating water systems.

MAXTREAT-2715

“MAXTREAT-2715 is a nitrite based liquid formulation, along with a pH buffer and yellow metal corrosion inhibitor. The product is recommended for use in closed component cooling system like D G sets and chillers. Also recommended for use as corrosion inhibitor in brine cooling and very low temp. cooling systems.
BENEFITS :
• Effective over wide range of conditions, such as in systems of multi-metal construction, where the flow is
sluggish and oxygen levels are either extremely low or high.
• Contains no chromate and produces no color in the treated water. Does not stain or harm equipmentt like
mechanical seals etc.
• Buffering agent automatically adjusts pH at the preferred level.
• Protects piping, valves, pumps and heat exchangers by producing a protective film on all exposed metal
surfaces – iron, steel, copper, copper alloys and aluminum.
• Easy to feed liquid, requires no premixing.
• Controls corrosion of both ferrous and non ferrous metallurgy”

MAXGREEN-6120

MAXGREEN 6120 is a powerful broad spectrum micro biocide. It is specially effective in controlling slime-forming bacteria, sulfate-reducing bacteria and algae in water cooling towers, industrial recalculating water systems.

MAXTREAT-7002

Maxtreat 7002 cooling water treatment is an effective BIO and ORGANICdispersant designed to remove and disperse deposits cause by biological activity or process contamination.

MAXTREAT-602

MAXTREAT-720D

MAXTREAT-801

Maxtreat-DOSS

Maxtreat DOSS is used in cooling water treatment and is an effective BIO & ORGANIC-dispersant designed to remove and disperse deposits cause by biological activity or process contamination.

MAXTREAT-2925

MAXTREAT-2925 is a nitrite based liquid formulation, along with a pH buffer and yellow metal corrosion inhibitor.The product is recommended for use in closed component cooling system like D G sets and chillers. Also recommended for use as corrosion inhibitor in brine cooling and very low temp. cooling systems.

MAXTREAT-2902

MAXTREAT-2902 is a liquid blend of molybdate and nitrite, along with a pH buffer and copper corrosion inhibitor.The product is recommended for use in closed component cooling system like chiller, DG sets, steel industry closed
loops like mold and machine cooling, lance, hood stack cooling etc.

FIRE SIDE CHEMICALS

Thermosol-DG

THERMOSOL-DG I s a multicomponent oil soluble formulation designed to provide combined benefits of improved combustion and protecting oil systems against corrosion.

THERMOMIX-BG

Thermomix – BG is a free flowing powdered slag modifier. It reduces slag formation caused by bagasse or heavy oil in furnaces and prevents its accumulation on heating surfaces.

BIOMIX

BIOMIX is a multi-component biomass additive in powder form. It comprise of slag modifier and corrosion inhibitor.

COALMIX

ECONOMIX-HD-UNIT

Economix-HD is a balanced formulation of oxidizing agents, combustion catalysts,slag modifiers and corrosion inhibitors.It is fed directly into the furnace while the boiler is in operation.

THERMOSOL-F-REG

Thermosol F(Reg) is a multi-component oil soluble formulation designed to provide combined benefits of improved combustion and protecting oil systems against corrosion.

Maxfloc-T

MAXFLOC–T is a liquid cationic polyelectrolyte. It is a medium molar mass, high charge density polymer. MAXFLOC–T is non toxic and approved for potable water clarification. It is also effective in oil water separation.

MAXFLOC-T N

MAXFLOC T N – can be used as Primary Coagulant, a coagulant taking the sole or primary role in the coagulation processes, refers to either:

MAXFLOC-509

Maxfloc 509 is a formulation liquid, medium molecular weight cationic polymer.It is specially designed organic polymer to have effective

MAXFLOC-A-107

MAXFLOC-A-107 is Ultra High Molecular Weight, Medium to Strong Anionic Polymer in powder form. MAXFLOC -A107 improve the efficiency of solid / liquid separation.

MAXFLOC-A-115

Maxfloc-A-115 is Ultra high molecular weight, medium Anionic polymer in powder form.It is designed to improve the efficiency of solid / liquid separation in various applications.Maxfloc A115 is particularly effective in textile industries, paper krofta anddomestic sewage for settling the SS contributing to COD/BOD load.

MAXFLOC-C-11

MAXFLOC-C-11 is Medium Molecular Weight Medium Cationic Polymer in Powder form.. MAXFLOC C-11 is designed to improve the efficiency of solid / liquid separation and oil / water separation processes .It is particularly effective for treating only waste water typical of refineries, steel mills and food processing plants.

MAXFLOC-T

“MAXFLOC–T is a liquid cationic polyelectrolyte. It is a medium molar mass, high charge density polymer. MAXFLOC–T is non toxic and approved for potable water clarification. It is also effective in oil water separation.
PRODUCT FEATURES
Liquid Product
Readily Soluble in Water
Unaffected by pre-chlorination
Accepted for use in drinking water clarification
Low storage cost and low bulk handling cost
Eliminates lime usage”

MAXFLOC-C-33

MAXFLOC-C-33 is medium molecular Weight Low Cationic
Charge Polymer in Powder Form.

BOILER WATER CHEMICALS

Maxclean-05

Maxclean – 05 is an off-line solid descalant. It is used for removing scale and corrosion products form boilers, heat exchangers, cooling systems etc. It is a balanced formulation of sulphamic acid, wetting agents and a corrosion inhibitor.

Maxclean-07

Maxclean 07 is an alkaline formulation designed for boil-out of boiler. It removes organic foulants like oil, grease, etc. from the boiler and also helps to soften the silica scale.

TABLET-TH-05

TH-05 – Hardness Tablets are the tablets used for measuring hardness of boiler feed water.

ION EXCHANGE RESIN

Tulsion-T-40

STRONG ACID CATION EXCHANGE RESIN SODIUM CYCLE
TULSION® T-40 is a strong cation exchange resin of polystyrene sulphonated type supplied in sodium form, specially developed for industrial and domestic softening applications.

Tulsion-T-42 NA

TULSION® T-42 is a premium quality strong acid cation exchange resin containing nuclear sulphonic acid groups having high exchange capacity, combined with excellent physical and chemical stability and operating characteristics.

Tulsion-T-42H

TULSION T-42 is a premium quality strong acid cation exchange resin containing nuclear sulphonic acid groups having high exchange capacity, combined with excellent physical and chemical stability and operating characteristics.

Tulsion T-52 H

“TULSION® T-52 is a premium quality strong acid cation exchange resin, having excellent resistance to oxidizing agents for use in industrial water softening, demineralization, condensate polishing and other process applications involving rigorous operating conditions. It is a higher crosslinked product.
TULSION® T-52 is produced as moist spherical beads, containing nuclear sulphonic acid groups, having excellent physical and chemical characteristics. Operating characteristics are virtually similar to those of TULSION® T-52.”

Tulsion T-5202

Tulsion-A-23

TULSION® A-23 is a strong base anion exchange resin based on polystyrene matrix, containing quaternary ammonium Type I group.

Tulsion-A-32

TULSION-A-32 is a ‘Tough Gel’ strong base anion exchange resin based on polystyrene matrix containing quaternary ammonium Type II groups.

Tulsion-A-36

TULSION®-A-36 MP is a highly efficient and durable strong base type II macroporous anion exchanger offering an exceptionally high operating capacity equivalent to gel type anion resin.

Tulsion A-2332

Tulsion-A-27 MP GEL

TULSION® A-27 MP is a highly efficient and durable strong base Type I macroporous anion exchange resin having capacity equivalent to gel type anion resin.

Tulsion CXO-9

TULSION® CXO-9 is a weak acid cation exchange resin having high exchange capacity, combined with excellent physical, chemical stability and operating characteristics. The functional group is carboxylic acid. It is suitable for water demineralization, de-alkalization and selective removal of heavy metals. It is ideally suited for use in a wide range of pH and temperature conditions. It is also used in sodium form for softening of water containing high hardness and high TDS as in oil well water treatment.

Tulsion CXO-12

“TULSION® CXO-12 is a premium quality high capacity weak acid cation exchange resin supplied as moist spherical beads in the hydrogen form. The functional group of the resin is carboxylic acid.
TULSION® CXO-12 has excellent physical and chemical stability and operating characteristics especially lower reversible swelling.
It is suitable for water demineralization, de-alkalization and selective removal of heavy metals. It is suited for operation over wide pH range and temperature conditions. In sodium form this resin is used for softening of water containing high hardness and TDS.”

Tulsion CXO-12 MP

“TULSION® CXO-12 MP is a premium quality high capacity macroporous weak acid cation exchange resin supplied as moist spherical beads in the hydrogen form. The functional group of the resin is carboxylic acid.
TULSION® CXO-12 MP has excellent physical and chemical stability and operating characteristics especially lower reversible swelling.
It is suitable for water demineralization, de-alkalization and selective removal of heavy metals. It is suited for operation over a wide pH range and temperature conditions. In sodium form this resin is used for softening of water containing high hardness and TDS.”

Tulsion-MB-106

TULSION® MB-106 is a mixture nuclear grade strongly acidic cation exchange resin TULSION® T-46 in Hydrogen form and nuclear grade strongly basic anion exchange resin TULSION® A-33 in hydroxide form in stoichiometric equivalent quantities.

Tulsion-MB-110

TULSION MB-110 is a mixture of gel type strong acid cation exchange resin TULSION T-46 in Hydrogen form and gel typs strong base anion exchange resin TULSION A-27 in hydroxide form in 1:2 volumetric ratio.

Tulsion MB-115

“TULSION MB-115 is a mixture of strongly acidic cation exchange resin TULSION® T-42 in Hydrogen form and strongly basic type I anion exchanger resin TULSION® A-23 in hydroxide form in 1:1.5 volume ratio quantities.
TULSION MB-115 is designed for use in the final polishing for production of ultra pure water.
TULSION MB-115 is the ideal choice for electronic industries, which manufacture semi conductors and television tubes etc where ultra pure water is required. This resin combines high capacity with excellent physical properties.”

Tulsion T-46 H

Tulsion T-48

“TULSION® T-48 is a powder form premium grade strong acid cation exchange resin containing nuclear sulphonic acid groups having high exchange capacity, combined with excellent physical and chemical stability and operating characteristics. It is ideally suited for use in a wide range of pH and temperature conditions.
TULSION® T-48 is supplied in hydrogen form. This is also used for de-alkalization and chemical processing. It is mainly used in condensate polishing for deploying precoat filter process i.e. candles coated with resin.”

Tulsion T-50

“TULSION T-50 is a premium quality strong acid cation exchange resin, containing nuclear sulphonic acid groups having high exchange capacity, combined with excellent physical and chemical stability used for removal of cation in condensate polishing plant.
TULSION T-50 is supplied as moist robust beads in hydrogen form and has controlled particle size cut for minimizing pressure loss in high flow column operations. It is also used as cation fraction in mixed bed where
TULSION TA-100 is used as inert separating media along with anion TULSION A-21 or TULSION A-21 MP.”

Tulsion T-52

“Tulsion T-52 is a strong acid cation exchange resin having excellent resistance to oxidizing agents for use in industrial water softening (Na form
of resin), demineralization, condensate polishing and other process applications involving rigorous operating conditions. It is a higher cross
linked product.
TULSION T-52 is produced as moist spherical beads, containing nuclear sulfonic acid groups, having excellent physical and chemical characteristics.
Operating characteristics are virtually similar to those of TULSION T-42.”

Tulsion A-21

“TULSION® A-21 is a premium quality gel strong base anion exchange resin containing quaternary ammonium TypeI, having high bead strength combined with excellent physical and chemical stability, used in condensate polishing plants or in mixed beds used in demineralization plants.
TULSION® A-21 is supplied as moist robust beads in chloride form and has a controlled particle size cut for minimizing pressure loss in high flow column operations. It is also used as the anion fraction in mixed bed where
TULSION® TA-100 is used as inert separating media along with cation TULSION® T-50. TULSION® A-21 offers combined properties of high capacity and excellent resistance to attribution and osmotic shock.”

Tulsion A-29

“TULSION® A-29 is a strong base anion exchange resin based on polystyrene matrix, containing quaternary ammonium Type I group. TULSION® A-29 is powder form cation has excellent chemical and operating characteristics along with excellent physical properties. TULSION® A-29 has a good operating capacity for weak acids like silicic and carbonic along with strong mineral acids, when used in water treatment along with strong acid cation exchange resin TULSION® A-29. It is ideally suited for use in a wide range of pH and temperatures.
TULSION® A-29 is supplied as moist powder mainly used for deploying precoat filter process.”

MAXTREAT-9601 M

Maxtreat 9601M is a safe, effective non oxidizing micro biocide in liquid form, highly effective against a broad spectrum of microorganisms and requires low dosage level.

Testing

dfgd