COOLING WATER CHEMICALS

Cooling Water Treatment Chemicals In Mumbai

Maxtreat-2521C


MAXTREAT- 2521C liquid formulation of scale inhibitors and antifoulants alongwith inhibitors for noble metallurgy designated to protect recirculating cooling water systems from scale, fouling, iron fouling and corrosion.

The product contains specialized inhibitors based on latest generation polymer technology and organpphosphonates for controlling precipitation of calcium phosphate, carbonate, sulfate and dispersion of heavy metals and suspended solids. The product is highly stable under all operating conditions and most suited for systems with noble metallurgy.

Maxtreat-2710


MAXTREAT- 2710 is a component of an advanced treatment of cooling water chemicals supplier in Mumbai technology that provides a cost effective alternative to traditional chromate treatment programs for industrial circulating water systems.

MAXTREAT- 2710 contains corrosion inhibitors and a unique polymer which protects system against scale and deposition problem. The product is ideal for corrosion and scale control for works as a corrosion inhibitor under severe stress conditions like those caused by high TDS, chlorides and temperature.

Maxtreat-2715


MAXTREAT- 2715 is a component of an advanced treatment technology that provides a cost effective alternative to traditional chromate treatment programs for industrial circulating water systems.

MAXTREAT- 2715 contains corrosion inhibitors and a unique polymer which protects system against scale and deposition problem.
BENEFITS :
Corrosion control
Zinc Stabilization
Scale Control
Deposit Control
Biocide Compatibility

Maxtreat-7202 D


MAXTREAT 7202 D is a special co-polymer liquid product formulated to control the deposition of PO4, SO4 SiO2,
Calcium scales in once-through and recirculating water systems.

MAXTREAT 7202 D is a anionic dispersant for
suspended materials such as silt & metal oxides. The dispersant action maintains the insoluble materials in
suspension, facilitating its removal from the system.
One of the most effective scale inhibitors for very high levels of PO4, Fe, heavy metals.
BENIFITS
• Allows operation at high levels of turbidity. Topline antifoulant for mud, ash and inorganic suspended solids.
• Very high iron dispersing property. Effective in high levels of both soluble and insoluble iron.
• Allows operation with high Fe & silica content, with other parameters also high.
• Good Silica dispersant.
• Stable during Chlorination
• Highly thermostable. Effectivity maintained at higher temp. zones.
• Stable with all control programs. Phosphate inhibition > 90 %.
• Complements good corrosion and biological control.

Maxtreat-7700


MAXTREAT-7700 corrosion inhibitor rapidly forms a stable, evenly distributed protective film on iron and steel piping and heat exchangers.

By reducing corrosion, this treatment increases the life of piping and equipment, minimizes pressure drop by preventing rust build-up and significantly reduces the amount of corrosion products released in the water. Can be used as corrosion inhibitor for firewater systems, drinking and wastewater lines etc.
Concentrated Synergetic blend of Zinc – phosphate based corrosion inhibitors, providing for excellent corrosion
protection in all types of water, from lean water to hard water.
BENIFITS:
• Effective at low doses and low levels of Zn-phosphate.
• Chlorine and chlorine activator stable – No need to increase feed during addition of chlorine + additives.
• Easy to dose liquid formulation can be dosed neat from the containers it is supplied in
• Iron present in the water is troublesome to the paper making process. It catalyses the decomposition of
bleaching solutions, lowers the brightness of the paper and /or stains the finished product. By minimizing
ferrous metal corrosion, Maxtreat-7700 minimizes the pick-up of iron by water and eliminates these difficulties.

MAXGREEN -7205


MAXGREEN 7205 is an Organo Inorgano formulation that acts as an excellent scale and corrosion inhibitor in all types of water. It rapidly forms a stable, evenly distributed protective film on all ferrous metallurgy thereby reducing corrosion, minimizes pressure drop by preventing rust build-up and increases the life of equipment.

BENEFITS
· It is a less toxic to the environment and more biodegradable.
· Has a low potential to bio-accumulate.
· It is designed on the principles of Green Chemistry and helps to prevent pollution.
· Free from heavy metals like zinc, chromates.
· Non-corrosive at end use concentration.
· Eco-Friendly.
· Conserves water through reuse and higher cycles of Concentration
· Stable against Chlorine and chlorine activator – No need to increase feed during addition of chlorine + additives.
· Offers low dosage economy.
· It has longer retention time period.
· Good protection achieved at higher temperatures also.
· Easy to dose liquid formulation-No need for special dosing arrangement.

Maxquat-50


MAXQUAT-50 is a powerful , broad spectrum microbiocide in industrial recirculating water ,air supplier of cooling water chemicals in Mumbai washer systems and for various other applications.

Maxquat – 50 is quaternary ammonium compound based biocide, particularly suited for cooling water systems including fouled systems.
Medical Applications : Disinfectant, Preservative and Germicide
Industrial Water : Biocide for control of Algae and fungi
Disinfection : Disinfectant in Food industry, breweries, Hotel Industry , Poultry Industry and Aqua culture
Other Applications : Phase Transfer Catalyst, Emulsifier, Antistatic Agent in Plastic Industry.

Maxtreat-606


MAXTREAT 606 is used to control build-up of biological slimes formed by algae and bacteria in Cooling Water Systems. The product is also effective in controlling sulphate reducing bacteria. High surface activity aids in cleaning systems by loosening and dispersing existing slime dposits from surfaces of Cooling Systems Equipments.

BENEFITS :
• Biodegradable – No pollution hazards.
• Non corrosive andd non volatile, safe from fire hazards.
• Effective in removal of existing deposits, disperses and removes slime.
• Also effective with oil contamination.
• Broad spectrum – arrests growth of SRB, slime, nitrifying bacteria and algae effectively.
• Not affected by opeational pH COD or organic contamination in the system, hence effective in all ranges.
• Compatible with other treatment chemiicals
• Based on quaternary ammonium compounds.

Maxtreat-608


MAXTREAT 608 is used to control build-up of biological slimes formed by algae and bacteria in Cooling Water Systems. The product is also effective in controlling sulphate reducing bacteria. High surface activity aids in cleaning systems by loosening and dispersing existing slime dposits from surfaces of Cooling Systems Equipments.

BENIFITS
Non corrosive andd non volatile, safe from fire hazards.
• Effective in removal of existing deposits, disperses and removes slime.
• Also effective with oil contamination.
• Broad spectrum – arrests growth of SRB, slime, nitrifying bacteria and specifically algae effectively.
• Excellent antifungal agent.
• Not affected by opeational pH COD or organic contamination in the system, hence effective in all ranges.
• Compatible with other treatment chemiicals
• Based on carbamate ammonium compounds.

Maxtreat-651


MAXTREAT- 651 is a isothiazoline based non oxidizing biocide in liquid form, highly effective against a broad spectrum of microorganisms.

MAXTREAT – 651 provides an accelerated response followed by a gradual action to effectively combat the menace of algae, fungi and bacteria. The active components, 2- methyl-4-isothiazolin-3-one and 5-chloro-2-methyl-4- isothiazolin-3-one. penetrate the cell membrane and inhibit specific enzymes in the cell, inhibiting growth, macromolecule synthesis, respiration, and cause intracellular energy levels to decline rapidly.
BENEFITS :
• Broad spectrum – Highly effective against bacteria and algae, particularly against iron & nitrifying bacteria
• performance is not affected by oil, organic or ammonia contamination.
• Recommended as a preservative and biocide in fuel tanks, antifungal paints, cosmetics etc.
• Effective in a wide range of pH from 6.5 – 9.0
• Not affected by chemicals used in cooling water treatment; can tolerate high TDS, hardness metal ion levels.
• Compatible with cooling water chemicals used.

MAXTREAT-617


MAXTREAT-617 Microbiocide is a chlorine donating compound in powder form. When introduced into the water stream, Maxtreat 617 releases powerful oxidizing hypohalous acid providing superior effectiveness against broad spectrum of microorganisms.

Particularly recommended for systems where use of gas chlorine is not desirable and the need is for a stable, highly concentrated form of chlorine without the associated radicals of sodium, calcium etc.
BENIFITS
Strong disinfectant and bleaching agent.
• Solid chemical in powder or tablet form, therefore less hazardous than chlorine or even hypo.
• At the same time highly concentrated form of chlorine, available chlorine > 80%
• Useful in bacteria and alga inhibition, sterilization, reduction in organic loads and suppression of excessive growth.
• Slow Release of hypohalous ions in water, useful as disinfectant in all related applications.

MAXGREEN-6800


MAXGREEN 6800 is a powerful broad spectrum microbiocide.It is halogen-free, does not contribute to the formation of dioxin or absorbable organic halides (AOX).Is effective in controlling slime-forming bacteria, sulfate-reducing bacteria and algae in water cooling towers, industrial recirculating water systems.

BENEFITS
· It is a readily biodegradable
· Has a low potential to bio-accumulate.
· Ability to remove established bio-film and to inhibit re growth.
· Broad spectrum of activity-kill aerobic and anaerobic microorganisms and algae.
· Chemically compatible with most common scale and corrosion inhibitors and dispersant.
· Effective against organisms that produce H2S, which causes corrosion and foul odors
· Effective at low concentration.
· Non-corrosive at end use concentrations
· Does not contain heavy metals.

MAXGREEN-6120


MAXGREEN 6120 is a powerful broad spectrum micro biocide. It is specially effective in controlling slime-forming bacteria, sulfate-reducing bacteria and algae in water cooling towers, industrial recalculating water systems.

BENEFITS
· It is readily biodegradable.
· Has a low potential to bio-accumulate.
· Ability to remove established biofilm and to inhibit re-growth.
· Broad spectrum of activity – kill aerobic and anaerobic microorganisms & algae.
· Chemically compatible with most common scale and corrosion inhibitors and dispersants.
· Reduce populations of sessile microorganisms known to cause corrosion.
· Excellent efficacy against Pseudomonas.
· Low toxicity profile
· Does not contain heavy metals.

MAXTREAT-7002


Maxtreat 7002 cooling water treatment is an effective BIO and ORGANICdispersant designed to remove and disperse deposits cause by biological activity or process contamination.

Maxtreat 7002 is very effective in at removing deposits containing process contaminants such as hydrocarbons.
BENEFITS
Disperses adherent biomass and slime allowing for better contact of biocides / chlorine leading to better efficacy.
Compatible with cationics, anionics and non-ionic compounds.
Disperses oil, hydrocarbons and other organic foulants, keeping the system clean and free from organic deposits. Can also be used for degreasing operations.
Superior wetting ability aids in removal of “turbidity”, ash, coal and similar inorganic fouling.
Not affected by higher levels of hardness, TDS and heavy metals.
Compatible with cooling water programs, chlorination and chlorine activators.
Stable under both, alkaline and acidic conditions of operations.
Can be used as a continuous feed or as slug dose.

Maxtreat-DOSS


Maxtreat DOSS is used in cooling water treatment and is an effective BIO & ORGANIC-dispersant designed to remove and disperse deposits cause by biological activity or process contamination.

Maxtreat® DOSS is very effective in softening and dispersing the OILY MASSES found in refineries, oil mills etc. It has also been found to be very effective at removing deposits containing process contaminants such as hydrocarbons.
BENEFITS
Maxtreat® DOSS disperses adherent biomass and slime allowing for better contact of biocides / chlorine leading to better efficacy.
Compatible with cationics, anionics and non-ionic compounds.
Disperses oil, hydrocarbons and other organic foulants, keeping the system clean and free from organic deposits.
Not affected by higher levels of hardness, TDS and heavy metals.
Compatible with cooling water programs, chlorination and chlorine activators.
Stable under both, alkaline and acidic conditions of operations and can be used as a continuous feed or as slug dose.
Effective in degreasing and removal of oil from various surfaces.

MAXTREAT-2925


MAXTREAT-2925 is a nitrite based liquid formulation, along with a pH buffer and yellow metal corrosion inhibitor.The product is recommended for use in closed component cooling system like D G sets and chillers. Also recommended for use as corrosion inhibitor in brine cooling and very low temp. cooling systems.

BENIFITS
• Effective over wide range of conditions, such as in systems of multi-metal construction, where the flow is sluggish and oxygen levels are either extremely low or high.
• Protects DG, Chillers, brine and ultra low temp circuits from corrosion. Does not stain or harm equipment like mechanical seals etc.
• Protects machine & mold cooling circuits and various closed loops associated with steel mills.
• Protects piping, valves, pumps and heat exchangers by producing a protective film on all exposed metal surfaces – iron, steel, copper, copper alloys and aluminum.
• Easy to feed liquid, requires no premixing.
• Controls corrosion of both ferrous and non ferrous metallurgy.

MAXTREAT-2902


MAXTREAT-2902 is a liquid blend of molybdate and nitrite, along with a pH buffer and copper corrosion inhibitor.The product is recommended for use in closed component cooling system like chiller, DG sets, steel industry closed
loops like mold and machine cooling, lance, hood stack cooling etc.

BENIFITS
Effective over wide range of conditions, such as in systems of multi-metal construction, where the flow is
sluggish and oxygen levels are either extremely low or high.
Contains molybdate & nitrites as a synergetic blend.
Contains no chromate and produces no colour in the treated water.
Buffering agent automatically adjusts pH at the preferred level.
Protects piping, valves, pumps and heat exchangers by producing a protective film on all exposed metal
surfaces – iron, steel, copper, copper alloys
Easy to feed liquid, requires no premixing.
Controls pitting corrosion. Buffers and dispersants maintain pH and keep the surface clean.