pH Booster in liquid form specially developed for the spray pond application in sugar industry.
SINGLE PRODUCT TREATMENT
Only one product is sufficient for complete boiler feed water treatment. Thus, making it cost effective over multiple product approach. Maxtreat Boiler Water treatment in Mumbai contains an alkalinity builder which maintains pH at optimal level in between 10 to 11.
Maxtreat BWC contains a powerful sequestering agent which changes scale forming constituents like calcium and magnesium into soluble complexes, thus preventing them from forming as scales.
Maxtreat BWC contains a catalysed oxygen scavenger which removes oxygen instantly thereby preventing corrosion. Maxtreat BWC contains a sludge conditioner which fluidises precipitated salts and keeps sediments in suspension along with changing its nature to non-adherent and non-sticky mass until they can be removed by blow down.
Maxgreen 3220 S is a blend of an antiscalant and an oxygen scavenger in powder form, designed for the treatment of boiler feed water used in coil type boilers. It contains an antiscalant to reduce deposition of calcium and iron compounds in coils and an oxygen scavenger to prevent corrosion.
RAPID OXYGEN REMOVAL
The catalysed oxygen scavenger in the product removes oxygen instantly. Hence,oxygen related corrosion is controlled due to this removal of oxygen.
Maxgreen™ 3220 S contains a powerful antiscalant which acts on the scale forming calcium and iron compounds. It helps in preventing scale formation during calcium slippage through the softener. Thus, the coil is protected against scaling and overheating.
The product contains a corrosion inhibitor which protects the coil against acidic corrosion. This reduces coil failure and unscheduled shutdowns.
Maxgreen™ 3221 is environmental friendly liquid formulation designed for the internal treatment of feed water used in smoke tube boilers. It contains corrosion inhibitor, antiscalant and sludge conditioner. Maxgreen™ 3221 is formulated for the treatment of smoke tube boilers using soft or demineralized feed water.
Being eco-friendly, Maxgreen™ 3221 does not persist in the environment as it breaks down into innocuous degradation products.
PREVENTS AND REMOVES DEPOSITION
Maxgreen 3221 contains a polymeric sludge conditioner which fluidizes sludge. A powerful antiscalant prevents calcium and iron deposition and also helps in the removal of existing scale. The combination of a sludge conditioner and antiscalant keeps the boiler clean.
Maxgreen 3221 contains a corrosion inhibitor which forms a protective passive film over the boiler surface. The corrosion inhibitor reduces fouling due to iron hydroxides, pitting and tube failures.
Maxgreen 3100 L is a catalyzed liquid oxygen scavenger. It is recommended for the rapid and complete removal of dissolved oxygen from boiler feed water where feed water alkalinity is excess.
Being eco-friendly, Maxgreen™ 3100 L does not persist in the environment, and it breaks down into innocuous degradation products.
The catalysed Maxgreen™ 3100 L speeds up removal of dissolved oxygen. Normal reaction time is very low compare to uncatalysed conventional sulphite.
EASY TO HANDLE
Maxgreen 3100 L is a liquid formulation. It is soluble in water. It is non-toxic and non-corrosive and, therefore, can be handled easily pH CONTROL
Maxgreen 3100 L is also helping in controlling desired pH of boiler water and reduces blowdown.
The catalytic action Maxgreen 3100 L reduces the excess requirement of oxygen scavenger in feed water for rapid removal of oxygen. Thus the requirement of oxygen scavenger reduces making treatment cost effective.
MAXTREAT-3004 is an alkaline formulation used to increase the alkalinity of boiler feed water. It is used to reduce corrosion of feed water tank, lines and pump.
MAXTREAT-3004 increases pH of feed water reducing corrosiveness. It also increases alkalinity in boiler water reducing scaling and corrosion of the boiler metal.
MAXTREAT-3004 helps in the formation of non-adherent sludge. It fluidizes the sludge which is then removed easily during normal.
Maxclean – 05 is an off-line solid descalant. It is used for removing scale and corrosion products form boilers, heat exchangers, cooling systems etc. It is a balanced formulation of sulphamic acid, wetting agents and a corrosion inhibitor.
Maxclean-05 contains sulphamic acid which is a mild acid. It dissolves hardness compounds in scale, quickly and completely.
SAFE FOR METAL
Maclean-05 contains a synthetic polymeric corrosion inhibitor which forms a protective film on the parent metal surface to prevent acid attack.Adsorption of this inhibitor is selective to the metal and therefore, only the base metal surface is protected while scale and corrosion products are exposed to the acid.
Maxclean-05 contains a wetting agent which emulsifies oil or grease present in the deposits. The detergent action of Maxclean-05 loosens dirt, silt, algae etc which can be removed during water flushing.
Maxclean 07 is an alkaline formulation designed for boil-out of boiler. It removes organic foulants like oil, grease, etc. from the boiler and also helps to soften the silica scale.
SINGLE STEP CLEANING
MAXCLEAN-07 removes oil and grease and softens inorganic scale.
EASY TO USE
No neutralization or passivation is necessary after descaling with MAXCLEAN-07.
TH-05 – Hardness Tablets are the tablets used for measuring hardness of boiler feed water.
If the hardness of water is more than 5 ppm as CaCO3 i.e. commercial soft water, it creates problems of scaling that is difficult to remove. This scale being a bad conductor of heat, more fuel is required to generate same amount of steam. TH- 05 hardness tablets is a quick, reliable and easy method to ensure quality of feed water going for steam generation.
Note:-We have NSF Approved (The Public Health & Safety Organization) water treatment chemicals for RO & Boiler water treatment, please contact if required.